These included knives used in demolition kits, medical kits, aviators' kits as well as electrician's kits. The company eventually filed for bankruptcy in and finally closed for good in February of Open your knife and determine how many blades it contains. You should be able to pull out each blade from its compartment.
Camillus knives may contain one to six individual blades, so use caution when opening them. Examine your knife for identifying marks on one of the blades. One Side of the blade should have the Camillus Knife brand and the other should have the blade number. These should be located at the base of the blade, where it is connected to the handle.
There may also be an imprint of the company logo on the main part of the blade, as well. You may need a magnifying class to read the brand on the knife if it is old or worn. I've heard arguments on both sides, but as of yet I'd be uncomfortable moving the positions beyond the level of opinion.
- Knife Identification.
- dating site for russian free.
- Knife Identification | www.stavebninypovina.com.
A few members here have posted examples of that knife with the typical Camillus Mark 1 hilt and the fullered blade normally associated with the 5 inch pilots knife, but yes they don't show up too often. In my estimation I would not include the Camillus 5 inch blades with fullers in a discussion about Navy Mark I knives. While somewhat similar the fullered blade knives are a distinct model and are most often associated with the USAAF, not the Navy.
The Camillus factory drawing for the fullered blade knife identifies it as "Our L 36 Hunting Knife with Mosser sheath. It is further described as "Used in all types of emergency kits. Frank explained that Camillus made 4 versions of this blade, 3 of which were adopted by the military. The blade not adopted had a flat blade with plastic Resinox pommel. Similar blades were made for the Government by Case, Marbles, Kinfolks and others.
The original design of this 5" blade is, I believe, a pre-war Marbles design which was known as the "Ideal", a Frank reports that Marbles was supplying the Ideal to the Government as early as So, as far as I can tell the best evidence indicates that these were Army Air Force knives and not Navy knives.
The similarities to Mark I knives are obvious, but they were procured and manufactured under different contracts and specifications.
Dating Camillus Mark I USN Knives
Charlie I happen to agree with your take here. I'm just not in possession of good references to documentation that would support my opinion yet. Heres a link to Frank Trzaska's Note on the subject. Once you open the link you can either scroll about have way down and look for the title "bright blades", or put it into the find function and let the machine do the work.
Posted 17 December - The OP had such and an easy question, one would think. But so many times the answer can be quite complicated. There are many variables to take into consideration and a general genealogy of dating can be made with Mark 1 knives. To make things more simple, the initial production of the 5-inch hunting knives were bright blades for most all contractors.
What had occurred was corrosion issues, through the second half of , there was a lot of discussion from the BuOrd and contractors to remediate the issue. By the close of , a satisfactory method was applied. Going into , treatment of the blades became more prevalent in the manufacture.
Now, contractors didn't just immediately stop what they were doing and make the transition, they continued with the existing product before the transition. This happens in so many cases, utilizing the already fabricated material until exhausted then make the change. Because of this, an exact dating system is impossible. Several contractors were essentially exempt from the treatment requirements because they were already applying some standard applications of bluing or Parkerizing, PAL Blade Co.
Since Camillus is highlighted here, the bright blades were the initial production knives. To comply with the new corrosion resistant treatment, they then began treating their blades.
How to Identify Camillus Knives | Our Pastimes
The knives illustrated in Post 5 could had been fabricated in that transitional phase, or part of sample packs for the Navy salt spray tests, but just a theory. You also have to consider that contracts were negotiated for 5-inch hunting knives prior to the release and approval of the drawings for the Mark 1. This initial fabrication met the basic outlined requirements what the Navy wanted, with the approval of the drawing, we then begin to see the application of the applied property marks which are simply USN on the ricasso. Military Related Knives And Tools. Whittling And Wood Carving.
Straight Razor Collector's Forum. Chinese Factory Manufactured Knives. Knife Mechanic's Swap Forum. Knife Repair and Restoration. Knives for Sale or Trade. General Off Topic Discussion. The Upper Room Forum. Off Topic Trading Post.
AAPK's Member Store Program
The Nagle ReBlade Story. Case's Pre-Dotted 54 Pattern. Mint Verses Everything Else. Traditional Pocketknives Come Full Circle. Mike Hoover puts stone slabs on a knife! Colin Paterson adds scrimshaw to an ivory handled Case Russlock knife.
Shop by category
All About Pocket Knives is a knife related resource center for buying, selling, researching, and discussing all things knives. Buy Browse By Category: Browse By Store Name: Access Your Seller Dashboard. Need an affordable and effective way to buy and sell knives online? AAPK has created a fantastic high value service for our members in good standing that includes: Knife Blades Used by Case W. Glossary of terms About Blade Steel. Illustration of pocket knife parts Blade Shapes and Descriptions.
Most Recent Newsworthy Developments. All About Pocket Knives All About Pocket Knives is a knife related resource center for buying, selling, researching, and discussing all things knives Skip to content. The company manufactured Camillus branded knives and was a prolific contractor for other knife brands up until its last days in when the company filed for bankruptcy. You do not have the required permissions to view the files attached to this post. It would only be logical to assume that the no line tang stamp preceded the short line tang stamp.
However, knife companies do not always do things logically! I think that holds true in this case. John Goins was however in deed an expert on cutlery markings, however no person is perfect. I don't wish in any way to denigrate Mr.
Goins efforts, but one must realize the book he wrote was a monumental undertaking. It would be difficult for anyone to know all of the marking of just the American made knives, let alone all of the imports. I spent about three years or more researching Schrade catalogs before posting the list of Schrade knives in the research section of AAPK. As someone who has done cutlery research I know how difficult it is to be accurate. There are several inaccuracies and omissions in my list. If John Goins were around today, I'm sure he would amend his book in a number of areas.
As we have discussed before, and as Tom Williams has pointed out, Camillus is one of the more difficult companies to date by tang stamps.
